• fk
  • youtube
  • twitter


Han’s Laser Technology Industry Group Co., Ltd, Copyright © GuangDong ICP No. 05013795

“More precise, More efficient”—Han’s Laser Launched Multi-axis Ultra-fast Micro-machining Equipment


LASER World of PHOTONICS 2019, Han’s Laser came again!
Han's Laser attended the LASER World of PHOTONICS 2019 during June 24~27, 2019. LASER World of PHOTONICS is the only professional optoelectronics fair in the world.
The Marvelous Business Founding Story of Mr Gao Yunfeng, CEO of Han's Laser
Mr Gao Yunfeng, the founder, and CEO of Han’s Laser Technology Industry Group Co., Ltd, has an marvelous business founding story.
Press release
Industry Knowledge
Annual activities
Video center

“More precise, More efficient”—Han’s Laser Launched Multi-axis Ultra-fast Micro-machining Equipment

Page view
Han's Laser Launched Multi-axis Ultra-fast Micro-machining Equipment,which can drill and cut various irregular holes such as cylindrical holes, positive tapered holes, negative tapered holes and squar

With the rapid development of precision processing technology, whether in civilian, industrial, medical or aerospace processing field, the development trend is toward miniaturization, high precision and high quality. Most traditional processing ways have been unable to meet these high precision requirements anymore. With the advantages of high-precision, high-efficiency, low-cost, high material availability, laser processing technology has become the main processing way of high-precision micro-hole processing

   After many years of hard technology research, Han’s Laser finally broke the technical barriers, and launched the "multi-axis ultra-fast micro-machining equipment" ,HN-GY-PS60, which can not only realize X, Y, Z motion control in three directions, but also real-time Controls the rotation of the laser and changes of processing tilt angle. By setting different combination of processing parameters, users can realize various irregular drilling and cutting of holes such as cylindrical holes, positive tapered holes, negative tapered holes and square holes

Machine Introduction


1. By setting multi-dimensional parameters in control software, to form the machining path, and output any irregular shape and any taper drilling.

2. Realize the optical quality of the processed inner wall Ra<0.1μm.

3. Equipped with coaxial high-pressure air blowing device and annular dross suction device to facilitate dross discharge.

4. High precision linear motion platform with repeatability of ±0.002 mm.

5. Optional coaxial image observation, real-time monitoring module of power

Samples Pictures:

(1) Different taper hole processing

0°taper hole

Material2mm stainless steel



Ratio of depth and aperture9:1  

Material2.3mm boron nitride



Ratio of depth and aperture10:1

Positive Tapered Hole

Front Image

The cross section magnified 500 times

Material0.3mm stainless steel


Taper: +14°


Negative Tapered Hole

Front Image

The cross section magnified 500 times

Material0.5mm Copper


Taper: -6.5°


(2)Irregularly Shaped Hole Processing

Square Hole Processing

Magnified 500 times

Magnified 1500 times

Material1mm Aluminium oxide



R Angle7um


Y Shape Hole

Front Image

Magnified 500 times

Material0.1mm stainless steel

Line Width of Y shape:26μm

taper: 0°


(3)Micro-hole Array Processing

Circular hole Array

Image magnified 200 times

Image magnified 500 times

Material0.1m Silicon Steel

100 holes in 0.4*0.4mm





Square Hole Array

Image magnified 500 times

Image magnified 1000 times

Material2.3mm boron nitride

Size of hole65*65um

R Angle11um



(4)Drilling holes in curved surface

Front Image

The cross section magnified 50 times

Material1mmCopper pipe





Application Introduction

Automobile Industryfuel spray nozzle

Aerospace Industryturbine blade film hole

Electric Industry---Electric probe card



Watch Industry---Gear machining, Dial plate micro-hole inlay

Medical field---Heart stent cutting