Cookies Consent

Han's Laser uses cookies to optimise website operation, enhance browsing experience, collect statistical analysis data and deliver interest-based advertisements.

Your cookies data could be temporarily shared with companies outside the EEA during processing. If the European Commission has not granted an adequacy decision confirming that the relevant third country maintains sufficient data protection safeguards, authorities may gain access to your transferred data for control and monitoring. In such cases, you may lack viable legal channels to claim your rights or seek effective redress.

Selecting "Accept All Cookies" constitutes your consent to the implementation of all cookies throughout the Han's Laser website, including statistical analytics cookies. The “Only Required Cookies” option enables you to restrict usage to essential functional cookies free of analytical tracking. You may also customise your cookie preferences at any time through the “Settings” link. For detailed information, please refer to our Privacy Policy.

Required Cookies (Necessary)

Optional Cookies (statistical analytics cookies)

Enabling this setting confirms your approval for cookie implementations throughout the Han’s Laser website, together with the transfer of your personal data to third countries. You may withdraw this authorisation via this interface at any time. Kindly note that all data processing undertaken pursuant to this consent shall remain legally valid prior to your withdrawal.

Solid-state Picosecond Laser

Machine Features

1. Maximum output power: 50 W @ 1064 nm, 30 W @ 355 nm / 532 nm

2. Ultrashort pulse output: <10 ps

3. Supports burst pulse train mode with up to 63 pulses

4. Repetition rate: Single pulse to 4 MHz

5. User-configurable frequency division, maximum division factor: 31

6. POL/POD output, remote PC control

7. Optional dual-wavelength output

8. Robust industrial-grade mechanical design

9. Temperature and humidity detection with self-protection function

Applications

Micro-processing of brittle materials including glass, sapphire and ceramics;

High-precision fine marking on glass, such as tiny invisible 2D codes (0.2 mm × 0.2 mm) and alignment marks;

Traceability marking on metal medical devices with acid resistance and oxidation resistance;

Cutting, drilling and surface coating removal on plastics, oxides and organic materials;

Surface logo marking for high-end electronic products;

Precision forming of superhard materials;

Substitute chemical etching for depth machining on metallic materials.

Technical Data Sheet

Machine Model	HL-PS-1064-20/30/50	HL-PS-532-12/18/30	HL-PS-355-8/12/20
Laser Wavelength	1064nm	532nm	355nm
Power	20~50 W @ 1000kHz, Typical	12~30W @ 1000kHz, Typical	8~20 W @ 1000kHz, Typical
Repetition Rate	Single pulse to 4000kHz
Pulse Width	<10ps
Pulse Stability	<2% rms @ 1000kHz, Typical
Spatial Mode	TEM00
M2	<1.3
Degree of Polarization	100:1 Vertical	100:1 Horizontal	100:1 Vertical
Beam Diameter	2.1 mm ±0.2mm	2.4 mm ±0.3mm	2.4 mm ±0.3mm
Full Divergence Angle	<2 mrad
Beam Symmetry	>85%
Beam Pointing Stability	< 25 µrad/°C
Power Requirements	100-240V,50 -60Hz
Ready Time	<10 min (standby), <30 min (cold start)
Temperature Range	Operating Temp: 18 ~35°C; Storage Temp: 0~50°C
Humidity	10–90%, non-condensing
Cooling Requirement	Water cooling, chiller temperature stability±0.1°C, minimum flow rate 6L/min
Total Heat Dissipation	<1000 W
Laser Head Dimensions (L×W×H)	700 mm x 400 mm x 163 mm
Laser Head Weight	56 kg
Controller Dimensions (L×W×H)	440mm x 432mm x 132mm
Controller Weight	19.3kg

Cookies Consent

Han's Laser Solutions

Solid-state Picosecond Laser

Applications

Recommended Products

UV Nanosecond Laser

UV Nanosecond Laser with Integrated Optics and Control System

Fiber Femtosecond Laser

Infrared & Green Nanosecond Laser