How to solve the high temperature alarm of laser chiller?
Release time:2022.04.08
Views:1451
In the process of using the laser water chiller, we often encounter the high temperature alarm of the water chiller, especially in summer, the frequency of the high temperature alarm of the water chiller will be higher. So how to solve this situation exactly?



Generally speaking, there are several situations of high temperature alarm of laser chiller:
 
1. The cooling capacity of the supporting laser cold water mechanism is insufficient.
In winter, the ambient temperature is low and the refrigeration effect is good enough, but in summer, the ambient temperature rises, which affects the normal heat dissipation of the chiller and leads to insufficient cooling capacity of the chiller, so it is impossible to effectively control the temperature of the cooling equipment. At this time, as a professional chiller manufacturer, we suggest you replace the laser chiller with greater refrigerating capacity;
 
2. The dust accumulated in the laser chiller affects the heat dissipation effect.
During the operation of the chiller, the dust screen and condenser fins of the chiller are easy to absorb dust and sundries. If they are not cleaned for a long time, the heat dissipation performance of the chiller will be seriously affected. In winter, the ambient temperature is low, which has no obvious effect on heat dissipation, but in summer, the ambient temperature rises, which greatly reduces the heat dissipation effect of the chiller, resulting in insufficient cooling capacity of the chiller. An effective way is users can use the air gun to clean the dust of the condenser of the chiller and remove and wash the dust net to solve the problem of high temperature alarm of the laser chiller.
 
3. The air outlet and air inlet are not smooth.
The air outlet and air inlet are not smooth, which affects the heat dissipation of the chiller, which will cause insufficient cooling capacity of the chiller, resulting in high temperature alarm during the operation of the chiller. Therefore, when the chiller works, it must ensure that the air outlet and air inlet are unobstructed.

 
Leave us a message
Name:
Phone:
Company:
Email:
Country
Message:
Contact Us